Shop

Dead Rail Super Starter Set with Standard Throttle (Tx21) Kit and LiPo Charger

$130.00$132.00

Product Quantity

Standard Throttle w/Momentum (Kit, Tx21)

$42.00

Available on backorder (only left in stock)

1

1.3A Standard Receiver (Rx60) with 5 Functions

$46.00

4 in stock (can be backordered)

1

E3 LiPo/LiFe AC Battery Charger

$20.00

3 in stock (can be backordered)

1

7.4V (2S) LiPo Battery Packs

Clear
1

SPDT Subminiature Slide Switch

$3.00

15 in stock (can be backordered)

1

LiPo 2-Pin Battery Connector Set (JST-RCY connectors)

$3.00

64 in stock (can be backordered)

1

LiPo Balance Wire Extension (2S, 8.5in, JST-XH connectors)

$4.00

22 in stock (can be backordered)

1

On30 Guy's Dead Rail Primer

$0.00
1

The On30 Guy TM Assembly and Operating Instructions for the DelTang Tx21 Throttle

$0.00
1

Available on backorder

Our Dead Rail Super Starter Set includes everything you need to start enjoying Dead Rail model railroading — just add some stranded wire to assemble the throttle and connect the receiver in your loco.

Here’s what you get:

Set Includes

  • 1- DelTang Tx21 Throttle Kit (assembly required)
  • 1- Basic Locomotive Receiver with optional wires for power, motor, and lights
  • 1- Turnigy 180mAh LiPo battery pack
  • 1- SPDT slide switch
  • 1- 2-Pin Battery Connector Set (JST-RCY connectors)
  • 1- Turnigy E3 Charger with LiPo Extension cable
  • Dead Rail Primer and New Loco Wiring Diagram (digital download)
  • On30 Guy TM Assembly Manual for Tx21 Throttle

You’ll need to supply the following items:

DelTang Tx21 Throttle
DelTang Tx21 Throttle

Tools Required

  • Electric drill and bits
  • Diagonal cutters
  • Wire stripper
  • Needle-nose pliers
  • #1 Phillips head screwdriver
  • Soldering iron (25-35W) with a fairly small tip (1/16″ conical or chisel tip is a good choice)
  • Hot air gun (for heat shrink tubing)
 

Supplies Required

  • 60/40 rosin-core solder
  • 28AWG stranded hookup wire
  • 3/32″ or 1/8″ heat shrink tubing
  • E6000 or similar glue
  • 9V alkaline battery

To see instructions on building the throttle kit included with this product,please click here.

1.3A Standard Receiver (Rx60) with 5 Functions

Dimensions

11×22.5mm (0.4×0.9")

Pad Spacing

2.54mm (0.1")

Voltage Range

3-16v

Motor Current

1.5A, 3.0-8.4v, <=16kHz 1.0A, 8.4-12.6, <=250Hz Currents are with motor stalled at 100% throttle

Receiver Current

15mA

R/C System

2.4GHz compatible with 22ms DSM2 and DSMX Air and 16.5ms DSM2 Surface

7.4V (2S) LiPo Battery Packs

Current Rating

180mAh 25C, 260mAh 35C, 300mAh 35C

Reviews

There are no reviews yet.

Be the first to review “Dead Rail Super Starter Set with Standard Throttle (Tx21) Kit and LiPo Charger”

Your email address will not be published. Required fields are marked *