Dead Rail Super Starter Set with Standard Throttle (THROT21) and LiPo Charger

$176.70$178.70

SKU: DT-SET21-SUPER Category:
Product Quantity

On30 Guy™ Standard Throttle w/Inertia - Assembled and Tested

Available on backorder (only -1 left in stock)

1

5V Power Supply

1 in stock (can be backordered)

1

1.3A Standard Receiver (Rx60) with 5 Functions

2 in stock (can be backordered)

1

E3 LiPo/LiFe AC Battery Charger

4 in stock (can be backordered)

1

7.4V (2S) LiPo Battery Packs

1

SPDT Subminiature Slide Switch

131 in stock (can be backordered)

1

LiPo 2-Pin Battery Connector Set (JST-RCY connectors)

31 in stock (can be backordered)

1

LiPo Balance Wire Extension (2S, 8.5in, JST-XH connectors)

12 in stock (can be backordered)

1

On30 Guy's Dead Rail Primer

1

Available on backorder

Description

Our Dead Rail Super Starter Set includes everything you need to start enjoying Dead Rail model railroading — just add some stranded wire to connect the receiver in your loco.

Here’s what you get:

On30Guy™ DelTang Compatible Throttle with Inertia Control (THROT21) is a direct replacement for the DelTang Tx21.

Set Includes

  • 1- On30 Guy™ Standard Throttle w/Inertia
  • 1- 5V Power supply (for charging Throttle battery)
  • 1- Basic Locomotive Receiver with optional wires for power, motor, and lights
  • 1- Turnigy 180mAh LiPo battery pack
  • 1- SPDT slide switch
  • 1- 2-Pin Battery Connector Set (JST-RCY connectors)
  • 1- Turnigy E3 Charger with LiPo Extension cable
  • Dead Rail Primer and New Loco Wiring Diagram (digital download)

You’ll need to supply the following items:

Tools Required

  • Electric drill and bits
  • Diagonal cutters
  • Wire stripper
  • Needle-nose pliers
  • #1 Phillips head screwdriver
  • Soldering iron (25-35W) with a fairly small tip (1/16″ conical or chisel tip is a good choice)
  • Hot air gun (for heat shrink tubing)
 

Supplies Required

  • 60/40 rosin-core solder
  • 28AWG stranded hookup wire
  • 3/32″ or 1/8″ heat shrink tubing
  • E6000 or similar glue

Additional information

1.3A Standard Receiver (Rx60) with 5 Functions

Dimensions

11×22.5mm (0.4×0.9")

Pad Spacing

2.54mm (0.1")

Voltage Range

3-16v

Motor Current

1.5A, 3.0-8.4v, <=16kHz 1.0A, 8.4-12.6, <=250Hz Currents are with motor stalled at 100% throttle

Receiver Current

15mA

R/C System

2.4GHz compatible with 22ms DSM2 and DSMX Air and 16.5ms DSM2 Surface

7.4V (2S) LiPo Battery Packs

Current Rating

180mAh 25C, 260mAh 35C, 300mAh 35C

Reviews

There are no reviews yet.

Be the first to review “Dead Rail Super Starter Set with Standard Throttle (THROT21) and LiPo Charger”

Your email address will not be published. Required fields are marked *