Dead Rail Layout Starter Set with 5 Standard Throttles (THROT21) and receivers, and LiPo Charger

$728.40$738.40

SKU: DT-SET21-LAYOUT Category:
Product Quantity

On30 Guy™ Standard Throttle w/Inertia - Assembled and Tested × 5

Available on backorder (only -2 left in stock)

5

5V Power Supply

3 in stock (can be backordered)

1

1.3A Standard Receiver (Rx60) with 5 Functions × 5

Available on backorder (only -2 left in stock)

5

E3 LiPo/LiFe AC Battery Charger

Available on backorder (only 0 left in stock)

1

7.4V (2S) LiPo Battery Packs × 5

Clear
5

SPDT Subminiature Slide Switch × 5

12 in stock (can be backordered)

5

LiPo 2-Pin Battery Connector Set (JST-RCY connectors) × 5

61 in stock (can be backordered)

5

LiPo Balance Wire Extension (2S, 8.5in, JST-XH connectors)

19 in stock (can be backordered)

1

On30 Guy's Dead Rail Primer

1

Available on backorder

Description

Our Dead Rail Layout Starter Set includes everything you need to equip five locos with Dead Rail — just add some stranded wire to connect the receiver in your locos.

This bundle includes a 5% discount on the Throttles, which is applied at time of checkout.

Here’s what you get:

On30Guy™ DelTang Compatible Throttle with Inertia Control (THROT21) is a direct replacement for the DelTang Tx21.

Set Includes

  • 5- On30 Guy™ Standard Throttle w/Inertia
  • 1- 5V Power supply (for charging Throttle battery)
  • 5- Basic Locomotive Receiver with optional wires for power, motor, and lights
  • 5- Turnigy 180mAh LiPo battery pack
  • 5- SPDT slide switch
  • 5- 2-Pin Battery Connector Set (JST-RCY connectors)
  • 1- Turnigy E3 Charger with LiPo Extension cable
  • Dead Rail Primer and New Loco Wiring Diagram (digital download)

You’ll need to supply the following items:

Tools Required

  • Electric drill and bits
  • Diagonal cutters
  • Wire stripper
  • Needle-nose pliers
  • Screwdrivers
  • Soldering iron (25-35W) with a fairly small tip (1/16″ conical or chisel tip is a good choice)
  • Hot air gun (for heat shrink tubing)
 

Supplies Required

  • 60/40 rosin-core solder
  • 28AWG stranded hookup wire
  • 3/32″ or 1/8″ heat shrink tubing
  • E6000 or similar glue

Additional information

1.3A Standard Receiver (Rx60) with 5 Functions

Dimensions

11×22.5mm (0.4×0.9")

Pad Spacing

2.54mm (0.1")

Voltage Range

3-16v

Motor Current

1.5A, 3.0-8.4v, <=16kHz 1.0A, 8.4-12.6, <=250Hz Currents are with motor stalled at 100% throttle

Receiver Current

15mA

R/C System

2.4GHz compatible with 22ms DSM2 and DSMX Air and 16.5ms DSM2 Surface

7.4V (2S) LiPo Battery Packs

Current Rating

180mAh 25C, 260mAh 35C, 300mAh 35C

Reviews

There are no reviews yet.

Be the first to review “Dead Rail Layout Starter Set with 5 Standard Throttles (THROT21) and receivers, and LiPo Charger”

Your email address will not be published. Required fields are marked *